Pure Georgette Panel Embroidery & Allover Sequin Fabric | 56 Inch | Crystal Work
About This Fabric
M'Foks Pure Georgette Panel Embroidery & Allover Sequin Work is a 56-inch wide embellished fabric built around two distinct work zones on a single piece of georgette — a 20-inch crystal-look panel embroidery border and a 36-inch allover sequin field. Together, these two zones create a fabric that is simultaneously structured and shimmering — the crystal panel provides a focal design element with raised, light-refracting detail, while the allover sequin base provides continuous brilliance across the main garment body.
The base is pure georgette — the standard for high-movement occasion wear in India. Georgette's characteristic crinkled surface weave creates natural body, a soft opacity, and a drape that moves with the wearer rather than against them. At approximately 200 grams per metre including the full embellishment weight, this is a heavier georgette than plain georgette — the sequin and crystal work adds significant density — but the fabric still flows and drapes naturally in motion, particularly when cut on the bias or used for lehenga panels and kurta flares.
The crystal embroidery in the 20-inch panel zone uses faceted synthetic crystal beads or crystal-cut sequin clusters that refract light in multiple directions, producing the visual effect of real crystal embellishment. This is the work technique commonly seen on high-end Bollywood and red-carpet garments. The 56-inch total width — wider than the standard 44-inch — provides exceptional versatility for wide-cut garments: bridal lehenga panels, long kurta fronts, full-width dupattas, and couples co-ord designs can all be cut without needing to piece fabric widths together.
Garment Applications
What You Get
- Pure Georgette base — crinkled weave, soft opacity, natural body and drape
- Crystal-look panel embroidery — 20-inch zone of raised, light-refracting crystal bead/sequin work
- Allover sequin work — 36-inch zone of full, continuous sequin coverage across the remaining width
- 56-inch total width — wider than standard 44-inch; ideal for wide-panel and bridal cuts
- Dual zone construction — panel border + sequin body ready for direct garment cutting
- Heavy at ~200 GSM (incl. embellishment) — substantial feel, moves fluidly in motion
- Crystal embroidery — faceted synthetic crystals, Bollywood/red-carpet aesthetic
- Suitable for both menswear and womenswear festive and occasion garments
- Ideal for couples co-ord — same fabric roll covers matching outfits perfectly
- Made in India
Technical Specifications
| Fabric Name | Pure Georgette Panel Embroidery & Allover Sequin Work Fabric |
| Base Fabric | Pure Georgette (Polyester base, crinkled weave) |
| ★ Total Fabric Width | 56 inches / 142 cm — wider than standard 44" |
| 💎 Crystal Embroidery Zone | 20 inches — dense crystal-look panel embroidery border |
| ✦ Allover Sequin Zone | 36 inches — continuous full-coverage sequin work |
| Embroidery Type | Crystal-look — faceted synthetic crystal beads / crystal-cut sequins |
| Fabric Weight | Approx. 200 GSM (includes full embellishment weight) |
| Drape | Fluid georgette movement — flows and drapes naturally in motion |
| Available Shades | Single Colour |
| Suitable For | Men's & Women's festive, bridal, carnival, couples co-ord garments |
| Country of Origin | India |
| HSN Code | 58109290 |
| ⚠ GST Rate | 12% — Chapter 58 embellished fabric (crystal embroidery + sequin work) |
Common Questions
What garments is this fabric best suited for?
Menswear: kurta, sherwani, indo-western jacket, carnival outfit, festival or stage performance jacket. Womenswear: lehenga skirt, kurta jacket, anarkali, designer gown, blouse. Couples co-ord: the same fabric roll cuts into matching outfits for both partners, with the panel and sequin zones placed identically. The 56-inch width also makes it a strong choice for wide bridal lehenga panels, full-width dupattas, and floor-length dress panels.
How do I use the two zones when cutting?
The 20-inch crystal panel zone functions as your decorative border — place it at the hem of a lehenga or kurta, along the front opening of a jacket, as a yoke panel, or at both ends of a dupatta. The 36-inch allover sequin zone forms the main body of the garment. Before cutting, lay your pattern pieces on the fabric and verify which zone each piece falls in — this decision determines where the crystal detail appears on the finished garment.
What is "crystal look" embroidery?
Crystal look embroidery uses faceted synthetic crystal beads or crystal-cut sequin clusters sewn in a dense, patterned arrangement. The faceted cuts on each crystal element refract light in multiple directions simultaneously, creating a visual effect similar to real Swarovski or glass crystal embellishment. Under event lighting, stage lights, or direct daylight, the panel zone produces a brilliant, multi-directional sparkle that photographic embroidery cannot replicate. This technique is standard in high-end Bollywood, bridal, and performance wear.
Can this be used for carnival or stage performance outfits?
Yes — this is one of the best fabric choices for carnival, stage, and performance wear. The full-coverage sequin zone and crystal panel combination creates maximum visual impact under stage lighting. The georgette base moves fluidly during performance, and the 56-inch width provides enough room for wide-cut costume panels. For carnival, cut the sequin zone into full-body panels and use the crystal panel as a trim accent on sleeves or hemline.
How many metres do I need for a couples co-ord set?
Men's kurta or indo-western jacket: 2.5–3 metres. Women's lehenga skirt + blouse: 3.5–4 metres. Women's full gown: 3–4 metres. Full couples set (men's kurta + women's lehenga): 6–7 metres. For performance or carnival matching outfits: 4–5 metres total for two pieces. The 56-inch width means you may need less yardage than you would with a standard 44-inch fabric for the same garment.
Does this fabric need a lining?
Yes, strongly recommended. The sequin and crystal work is on the face of the fabric — the reverse side shows raw attachment stitching and loose threads that are uncomfortable against skin. Line all body-contact areas (bodice, lehenga interior, jacket lining) with china silk, polyester lining, or soft poly georgette in a matching or contrasting colour. For lehenga skirts, a full inner lining also provides structure and hides undergarments.
Stitching Tips & Care
Cutting & Stitching Tips
-
1Map the two zones before cutting
Lay the full fabric flat and identify the crystal panel zone (20 inches) and the allover sequin zone (36 inches). Mark with fabric chalk or pins. Decide which zone will form which part of each garment. For a lehenga: sequin zone = skirt body, crystal panel = hem border or waistband area. For a kurta: sequin zone = body, crystal panel = front panel stripe or collar border.
-
2Always use sharp scissors — no rotary cutter on embellished zones
Rotary cutters will catch on crystal beads and sequins, pulling the work from the georgette base. Use sharp fabric scissors for all cuts through embellished areas. Cut from the reverse side of the fabric where possible to protect the embellishment surface. Cut slowly and deliberately through crystal bead clusters.
-
3Remove embellishment from all seam allowances
Before stitching any seam, carefully remove all crystals, beads, and sequins from the 1.5–2 cm seam allowance on both sides of the seam line. Use small scissors and tweezers. Stitching through crystal beads breaks machine needles instantly and creates dangerously weak seams that will burst open under garment stress. This step is non-negotiable for durable construction.
-
4Handle georgette carefully — it shifts while cutting
Plain georgette is already a slippery fabric; with sequin and crystal embellishment, it shifts even more. Use a cutting mat, pin generously, or place a sheet of tissue paper beneath the fabric while cutting to reduce slippage. Cut single layers only for precision on crystal panel placement.
-
5Needle, thread, and seam finishing
Use a sharp or microtex needle (70/10 or 80/12) with fine polyester thread for georgette base seams. Use a French seam, flat-felled seam, or serged edge for all seam finishes — georgette frays rapidly. The lining must attach at all seam points to prevent the unfinished embellishment reverse from rubbing against the body.
Care Instructions
-
•Washing
Dry clean only for all stitched garments — this is the only recommended care method for garments with both crystal embroidery and allover sequin work. For unstitched fabric, gentle spot cleaning with a damp cloth on non-embellished areas only. Do not submerge, hand wash, or machine wash under any circumstances.
-
•Drying
Lay flat in shade only. Do not hang heavily embellished garments by the shoulder — the weight of crystal and sequin work causes the georgette base to stretch and distort permanently when hung wet. No tumble drying. No direct sunlight — UV exposure can dull sequin and crystal lustre over time.
-
•Ironing
Do not iron on the embellishment face — crystals and sequins will melt and shatter permanently under iron heat. If pressing is needed, use the lowest heat setting on the reverse side only with a thick pressing cloth. A steamer held at a distance (not direct contact) is safer than a direct iron for removing creases from georgette.
-
•Storage
Roll or fold loosely with the embellished face outward and layers of soft tissue paper between folds to protect the crystal and sequin surface from abrasion. Store in a breathable muslin garment bag — never a sealed plastic cover, as moisture trapped inside causes sequin tarnishing and bead adhesive degradation over time. Store flat if possible for heavily embellished pieces.
⚠ Crystal beads and sequins will melt or shatter under direct iron heat. Never iron on the embellishment face. Remove all embellishment from seam allowances before stitching — sewing through crystals breaks needles and weakens seams. Dry clean only for stitched garments. Do not hang embellished garments while wet — the weight of the work will stretch the georgette base irreversibly.
Packed & Marked By:
Mangaldeep & Concept
Address: 3, Kankariya Complex, beawar - Rajasthan 305901
India
Customer Support:
WhatsApp: +91 7597878011
Email: info@mfoks.com
Choose options